**BSS84(Z)-VB Transistor**

- **Silkscreen:** VB264K
- **Brand:** VBsemi
- **Parameters:**
- Package Type: SOT23
- Channel Type: P—Channel
- Maximum Withstand Voltage (Maximum VDS): -60V
- Maximum Drain Current (Maximum ID): -0.5A
- RDS(ON): 3000mΩ @ VGS=10V, VGS=20V
- Threshold Voltage (Threshold Voltage): -1.87V

- **Package:** SOT23

**Detailed parameter description and application introduction:**

The BSS84(Z)-VB transistor is a P-Channel MOSFET in SOT23 package. Its maximum withstand voltage is -60V and maximum drain current is -0.5A. At VGS=10V and VGS=20V, RDS(ON) is 3000mΩ and threshold voltage is -1.87V respectively.

**Application fields and examples:**

1. **Power management module:** Due to its high withstand voltage and moderate drain current, BSS84(Z)-VB is suitable for power management modules such as regulators and switching power supplies.

2. **Signal amplifier:** In scenarios where P-Channel MOSFET is required for signal amplification, this transistor can be used in signal amplifier modules.

3. **Current control module:** Due to its low threshold voltage and controllable drain current, it can be used to design current control modules such as current sources or current controlled switches.

4. **Battery protection:** Battery protection modules can be applied when the battery needs to be protected from over-current and over-voltage.

Please note that the above examples are for reference only and the actual application may vary depending on the specific design requirements. In design, always refer to the data sheet and specification to ensure correct use and performance.