Model: ZXMN6A07FTA-VB.
Silk screen: VB1695.
Brand: VBsemi.
Parameters: N channel, 60V, 4A, RDS(ON) 85mΩ @ 10V, 96mΩ @ 4.5V, 20Vgs (±V ); 1~3Vth (V).
Package: SOT23.
.
Detailed parameter description and application introduction:.
1. Channel type: N channel.
- This means This is an N-channel MOSFET commonly used in electronic equipment, especially applications where positive voltage power supplies need to be controlled. .
.
2. Rated voltage (VDS): 60V.
- This is the maximum voltage that the channel MOSFET can withstand, indicating that it is suitable for circuits that need to handle up to 60V. .
.
3. Rated current (ID): 4A.
- This is the current rating of the channel MOSFET, indicating the medium current load it can handle. .
.
4. Static drain-source resistance (RDS(ON)): .
- RDS(ON) is the resistance of the channel MOSFET in the on-state. At 10V it has a resistance of 85mΩ and at 4.5V it is 96mΩ. This shows that in the on-state, its resistance is relatively low, helping to reduce power consumption and heat. .
.
5. Gate-source voltage rating (Vgs): 20V (±V).
- This means that the rated range of gate-source voltage is plus or minus 20V. The gate-source voltage is used to control the on and off states of the MOSFET. .
.
6. Threshold voltage (Vth): 1~3V.
- This is the threshold voltage range of the channel MOSFET, indicating the voltage that needs to be applied to the gate in order for the device to start conducting . .
.
Application Introduction: .
This type of N-channel MOSFET is suitable for a variety of medium power applications, including but not limited to the following fields and modules: .
.
1. Power Switch: This MOSFET can be used in medium-power power switching modules such as DC-DC converters to achieve efficient power conversion. .
2. Battery management: It can be used in battery protection circuits to control battery charge and discharge and prevent over-discharge. .
3. Power selector and switch: It can be used as power selector and power switch to switch between different power sources. .
4. Load switch: It can be used as a load switch in applications where medium current loads need to be controlled, such as motor control. .
.
In short, this type of N-channel MOSFET is suitable for areas that need to handle medium current loads to meet the needs of power switching and power management, especially medium power applications that need to handle positive voltage power supplies. Suitable for medium power applications due to its low drain-source resistance.