Model: TP0610K-T1-E3-VB.
Silk screen: VB264K.
Brand: VBsemi.
Parameters: P channel, -60V, -0.5A, RDS(ON) 3000mΩ @ 10V, 3680mΩ @ 4.5V, 20Vgs (±V); -1.87Vth (V).
Package: SOT23.
.
Detailed parameter description and application introduction: .
1. Channel type: P channel .
- This means that this is a P-channel MOSFET, typically used in applications where negative voltage power supplies need to be controlled. .
.
2. Rated voltage (VDS): -60V.
- This is the maximum negative voltage that the channel MOSFET can withstand, indicating that it is suitable for circuits that need to handle up to -60V. .
.
3. Rated current (ID): -0.5A.
- This is the rated current of the channel MOSFET, indicating the small current load it can handle. .
.
4. Static drain-source resistance (RDS(ON)): .
- RDS(ON) is the resistance of the channel MOSFET in the on-state. At 10V it has a resistance of 3000mΩ and at 4.5V it is 3680mΩ. This indicates that in the on-state, its resistance is relatively high, making it suitable for low-power applications. .
.
5. Gate-source voltage rating (Vgs): 20V (±V).
- This means that the rated range of gate-source voltage is plus or minus 20V. The gate-source voltage is used to control the on and off states of the MOSFET. .
.
6. Threshold Voltage (Vth): -1.87V.
- This is the threshold voltage of the channel MOSFET and represents the voltage that needs to be applied to the gate in order for the device to start conducting. .
.
Application Introduction: .
This type of P-channel MOSFET is usually used in low-power applications, including but not limited to the following fields and modules: .
.
1. Power supply Switch: It can be used in small-power power switch modules, such as battery protection circuits, to achieve battery charging and discharging control. .
2. Signal switch: In low-power signal switching applications, such as audio signal switches, it can be used to control the signal path. .
3. Power Inverter: In low power inverter, it can be used to convert DC power into AC power. .
4. Low power control: In applications that need to control small power loads, such as LED control and small motor control, it can be used as a load switch. .
.
In short, this type of P-channel MOSFET is suitable for areas that need to handle small power supplies and loads to meet the needs of power switching and power management, especially small power that needs to handle negative voltage power supplies. application. Suitable for low power applications due to its lower current and voltage capabilities.